108
7.2.1 Performing a full scan
The automatic scan Full scan scans all DAB+ Band III stations and thereby finds
all stations being broadcast within the reception range.
Aer the scan is complete, the first station is played back in alphanumeric order.
> In order to perform a complete scan, open the menu by keeping the SELECT/
MENU buon depressed and use the < or > buons to select the menu item
[Complete Scan]. Then press the SELECT/MENU buon briefly.
>
[Scanning...] appears on the display.
During the scan the number of stations found is displayed.
If no stations are found, check the dipole antenna and change the installation
location if required (Section 5.3.2).
To Next Page
Loading...
