TechniSat DIGITRADIO 52 CD

121
DE
EN
FR
NL
9.2 Playing / pausing CDs
> Press the MODE buon as oen as required until [CD] is shown on the display.
> In order to insert a CD, press the CD compartment open/close buon, insert
the CD with the leering uppermost into the CD compartment and press the CD
compartment open/close buon again to close the CD loading process.
Insert the CD carefully with the printed side facing upwards. Ensure that the CD is
not positioned at an angle.
When inserting / removing the CD, please hold it by the edge.
Do not start the operation until the content of the CD has been read completely,
to ensure that all the required information on the memory medium has been
read. With MP3 CDs in particular, this process can take some time.
> By pressing the Play/Pause buon you can start/pause/continue the playback
(the playing time flashes on the display when paused).
Always stop the playback prior to removing the CD.
If there is no playback, the DIGITRADIO 52 CD switches to standby aer approx.
15 minutes.