132
You may need to reset the time aer a power cut. The time can either be
updated manually, via DAB or UKW. See Section 13.1 for further information.
As an example, the making of seings on Alarm 1 will now be explained. Press the
SELECT/MENU buon to confirm each seing step and to jump to the next one. Press
the < or > buon to change an option.
1. Press one of the Alarm 1 or Alarm 2 buons to set the two alarm time
memories.
> The display shows [ALARM 1 SET] (with Alarm 1).
2. Confirm by pressing SELECT/MENU buon.
3. Set the time at which the alarm should start (the hour first, then the minutes).
Press SELECT/MENU to go to the next seing.
4. Set the duration for which the alarm should sound (15, 30, 45, 60, 90, 120 min)
5. Select the source, which should be reproduced as the alarm signal (the choice is
DAB, FM and buzzer.)
To Next Page
Loading...
