TechniSat TECHNIRADIO 3

102
8.3 Automatic station scan
> Hold down the <Tune or Tune> buons for longer (2 to 3 sec.) in order to
automatically search for the next station with sucient signal intensity.
> Alternatively, you can press the Select buon.
If an FM station with sucient signal strength is found, the scan stops and the
station is played. If an RDS station is received, the station name, and possibly the
radio text, appear.
Please use the manual station scan for seing weaker stations.
8.4 Manual station scan
> Press the <Tune or Tune> buons repeatedly to set the desired stations or frequency.
The display shows the frequency in increments of 0.05 MHz.
8.5 Scan seings
In this menu item it is possible to set the sensitivity of the scan.
> Hold down the Menu buon, use the <Tune or Tune> buons to select the [Scan
seings] item and press the Select buon.