What to do if there is no sound on my TechniSat TECHNIRADIO 5 IR Radio?
If you can't hear any sound from your TechniSat Radio, try these steps: First, increase the volume. If you're using headphones, remove the headphone jack to listen via the speaker. Also, ensure that you have selected the correct source.
Why is the sound weak on my TechniSat TECHNIRADIO 5 IR?
If the sound from your TechniSat Radio is weak or of poor quality: * Move the unit away from devices like televisions that might be disrupting the reception. * Extend the antenna and rotate it to improve the reception.
What to do if I hear distorted sound on my TechniSat TECHNIRADIO 5 IR?
If you hear distorted sound from your TechniSat Radio, it might be due to disruptive radio waves from nearby devices. Try removing mobile phones or other devices from the vicinity of the radio.
What to do if my TechniSat Radio is malfunctioning?
If your TechniSat Radio experiences operational malfunctions like loud noises or a malfunctioning display, remove the mains plug, leave it disconnected for about 10 seconds, and then reconnect it.
How to fix TechniSat Radio display that won't switch on?
If the display on your TechniSat Radio does not switch on: 1. Switch the device off. 2. Remove the mains plug, reinsert it, and switch the device on again. 3. Check the display brightness setting.
What to do if no DAB signal is being received on TechniSat Radio?
If your TechniSat Radio isn't receiving a DAB signal: * Check if DAB reception is available in your region. * Readjust the antenna. * Try to receive other stations.
Why is the sound quality poor on my TechniSat TECHNIRADIO 5 IR Radio?
Poor sound quality on your TechniSat Radio can be due to a couple of reasons. Other devices, such as televisions, might be disrupting the reception; try moving the radio further away from these devices. Additionally, make sure the antenna is fully extended and correctly oriented to improve reception.
What to do if the display on my TechniSat TECHNIRADIO 5 IR does not switch on?
If the display on your TechniSat Radio isn't turning on, try switching the device off, removing the mains plug, reinserting it, and then switching the device back on. Also, check the display brightness setting.
What to do if my TechniSat TECHNIRADIO 5 IR Radio is not receiving a DAB signal?
If your TechniSat Radio is not receiving a DAB signal, first check whether DAB reception is available in your region. Then, readjust the antenna and try to receive other stations.
Details functions of buttons like Power, Mode, Menu/Info, Scan, Preset, and rotary knobs for navigation and volume.
Description of the colour display, telescopic antenna, power input, Aux In, and headphone socket.
Explains warning symbols, signal words, and general safety precautions for device usage.
Guidance on avoiding electric shock, proper ventilation, and safe operating conditions.
Includes EU disposal directives and legal notices like declaration of conformity.
Specifies the device is for private use, reception of DAB+/FM/Internet radio stations.
Covers risks like suffocation, damage, heat exposure, water, and emphasizes professional repairs.
Instructions on using the correct power adapter and handling device defects or damage safely.
States compliance with Directive 2014/53/EU, with a link to the full text.
Details warranty, contact hotline, online repair ordering, and return address.
Lists included items and highlights key features like DAB+/FM/Internet radio and UPnP playback.
Covers connecting the mains adapter, aligning the antenna, and placing the device.
Instructions for connecting the mains adapter and extending the telescopic antenna.
Guidance on placing the radio on a firm base with adequate ventilation to prevent overheating.
How to connect headphones and the implications for speaker output.
Advises against listening at high volumes to prevent permanent hearing impairment.
How to switch the device on and put it into standby mode.
Methods to switch between DAB+, FM, Internet Radio, and Aux In sources.
Instructions on using the volume knob to increase or decrease the audio output.
How to view detailed information for various radio modes and playback.
Explains elements like current source, time, station name, and status bar.
Guide to using Menu/Info button and Scroll&Select knob for menu navigation and confirmation.
How to open the main menu to access device functions and system settings.
Steps for connecting the device to a Wi-Fi network, including network search and password entry.
How to select and view stations from the Internet radio station list.
Instructions for saving up to 40 Internet radio stations to the device's favorites memory.
How to access saved stations and remove them from memory slots.
Connecting to UPnP servers or Windows Media Player for music playback.
Using buttons to play, pause, skip tracks, and stop music playback from media sources.
Explanation of DAB+ digital radio benefits and broadcast structure.
How to tune into DAB+ stations, perform scans, and optimize antenna reception.
Steps to conduct a full scan of all available DAB+ stations in the reception area.
How to select stations and save them into memory slots.
Accessing saved stations and removing them from memory slots.
How to view signal strength bars and indicators for DAB+ reception quality.
Instructions for manual channel selection and antenna alignment for optimal DAB+ signal.
Settings for dynamic range control (DRC) to balance volume variations.
Options to change the display order of DAB+ stations (e.g., alphanumeric).
How to select and activate the FM radio function on the device.
Explanation of RDS and how it displays station name and program type for FM.
Procedures for automatically scanning for stations or manually tuning frequencies.
Setting scan sensitivity to stop only for strong signals or for all signals.
Options to select mono or stereo playback for FM radio based on reception quality.
Instructions for saving FM stations to memory and recalling them later.
Connecting external devices via Aux In and switching to AUX mode for playback.
How to set the sleep timer to automatically switch the radio to standby.
Detailed instructions for programming alarm times, repeat options, and sound sources.
How to turn off an active alarm or activate the snooze function.
Adjusting sound preferences using preset equaliser options or custom bass/treble settings.
Manually setting the device's time and date through menu options.
Choosing automatic time updates via DAB+, FM, Internet, or disabling updates.
Selecting 12/24 hour format and configuring the device's time zone.
Steps for connecting to Wi-Fi networks using the network wizard.
Using WPS for a direct, password-free Wi-Fi connection to a router.
Automated process for initial configuration including language, time, and Wi-Fi setup.
Setting brightness levels for operation and standby, and enabling auto-dim.
Changing language, restoring factory defaults, and checking software version.
Instructions for updating the device's software via the Internet, including auto-check.
Warning about electric shock; disconnect power, avoid water and harsh chemicals.
Guidance on using a soft, damp cloth and avoiding abrasive cleaners or solvents.
Solutions for no reception, checking mode, antenna, and interference.
Diagnosing and resolving sound issues, including volume, headphone jack, and external interference.
Steps to resolve issues with the device not switching on or the display not illuminating.
Details on power supply, Wi-Fi standards, frequencies, and reception bands for DAB+ and FM.
Information on music output, operating conditions, dimensions, weight, and power cable specs.
General| Radio type | Portable |
|---|---|
| Tuner type | Digital |
| DAB band range | 174 - 240 MHz |
| Supported radio bands | DAB, UKW |
| Radio Data System (RDS) | Yes |
| RMS rated power | 10 W |
| Number of built-in speakers | 2 |
| Display type | TFT |
| Display diagonal | 2.4 \ |
| Ethernet LAN | - |
| Wi-Fi standards | 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
| Headphone outputs | 1 |
| Headphone connectivity | 3.5 mm |
| Coloration | Monochromatic |
| Product color | Black |
| Volume control | Rotary |
| On Screen Display (OSD) languages | CZE, DEU, DUT, ENG, FRE, ITA, NOR, POL, SLV |
| Power source | AC/DC |
| AC input voltage | 230 V |
| DC input voltage | 8 V |
| AC input frequency | 50 Hz |
| Battery capacity | 2000 mAh |
| Storage temperature (T-T) | 5 - 35 °C |
| Operating relative humidity (H-H) | 5 - 90 % |
| Package type | Box |
| Package depth | 1500 mm |
| Package width | 3530 mm |
| Package height | 2400 mm |
| Package weight | 2270 g |
Weight and Dimensions| Depth | 1140 mm |
|---|---|
| Width | 270 mm |
| Height | 1180 mm |
| Weight | 1660 g |
To Next Page
