96
> In order to perform a complete scan, open the Menu by holding down the Menu
buon and use the <Tune, Tune> and Select buons to select the menu item
[Complete Scan].
>
[Scanning...] appears on the display.
During the scan, a progress bar and the number of stations found are displayed.
If no station is detected, check the telescopic antenna and, if required, change
the installation location (Section 5.3.3 / 3.2.1).
7.2.2 Selecting the station
> By pressing the <Tune or Tune> buons, the station list can be called up and
you can switch between the available stations.
To Next Page
Loading...
