Techno CNC Systems Titan Series User Manual

1
Call: 1-631-648-7481 or Visit: support.technocnc.com
Titan Series WinCNC Manual
WinCNC
This document will provide a quick guide to the set up and operating
procedure of the Techno Titan CNC Router with a WinCNC Controller.
The Techno Titan CNC Router is powered by high precision stepper motors
and controlled by a PC with a WinCNC Control System.
Techno CNC Systems, LLC. ©2015 (06/17)

Techno CNC Systems Titan Series Specifications

General

Brand	Techno CNC Systems
Model	Titan Series
Category	Control Systems
Language	English

Summary

Initial Setup and Safety

Safety Instructions

Essential safety instructions to be followed before operating the machine.

Colleting Guidelines

Techno Titan Series Installation

Step-by-step instructions for unpacking and initial assembly of the Techno Titan CNC Router.

Vacuum Pump Installation

Controller Functionality and Software Overview

Control Panel Functions

Explanation of the various buttons and indicators on the machine's control panel.

Enabling the Machine

Steps to power on the controller and enable the machine's motors.

Techno CNC Software Controller Overview

Overview of the Techno CNC Controller software features and user interface.

Operating Tutorials

WinCNC Software Interface and Navigation

Machine Startup and Homing

Procedure for homing the machine to check limit switches and set reference points.

Manual Machine Operation

Setting Machine Zero Positions

Guide to setting XYZ zero positions, WCS, and User Origin.

Running G-code Files

Instructions on loading, viewing, simulating, and running G-code files.

Advanced Tutorials

Automatic Tool Changers

Measuring Tool Lengths

Learning Tool Pocket Positions

Using the 4th Axis

Error Codes and Troubleshooting

Common Error Messages