Techno Gears Marble Mania HOTSHOT - User Manual

Start assembly by placing red blocks (9) on the base grid as indicated.

Attach purple tubes (12) and grey connectors (122) to form initial support structures.

Assemble the launcher unit using parts 94, 16, and 193.

Mount the assembled launcher mechanism onto the base structure.

Connect red, purple, and orange track segments using connectors.

Connect blue track piece 20 with orange piece 70.

Attach red and blue tube segments to form upper supports.

Join red track piece 20 with blue piece 71.

Construct intermediate supports using blue, green, and red tubes.

Install the green gear mechanism (part 22) and associated components.

Connect orange curved track pieces (70, 73) to the orange straight piece (24).

Insert the vertical yellow tube section (part 81) into the central structure.

Assemble multiple support segments using various colored tubes and connectors.

Join blue straight track piece 20 with purple curved piece 70.

Connect purple curved piece 70 to green tube 94.

Connect assembled track segments to the main marble run structure.

Add final support structures using red tubes (9) and grey connectors (122).

Join red track piece 20 with purple curved piece 70.

Attach orange curved tracks (70, 73) to the silver loop track component (82).

Important safety warnings regarding choking hazards and product usage.