F3S-TGR-SBx-KxC series User’s manual
1
F3S-TGR-SB4 – KxC
Type 4 Safety Light Curtain
F3S-TGR-SB2 – KxC
Type 2 Safety Light Curtain
USER'S MANUAL
F3S-TGR-SBx-KxC series User’s manual
2
INTRODUCTION
This instruction Manual describes the F3S-TGR-SBx-KxC Safety Light Curtain
(SLC).
General Safety Requirements
Always heed the following points when using the F3S-TGR-SBx-KxC:
• Read this manual thoroughly to understand and make good use of the
descriptions before installing and operating the product.
• A qualified person should conduct a risk assessment on the machine, and
determine the suitability of this product before installation.
• Keep this Manual at the place where the operator can refer to it whenever
necessary.
• Do not open the housing or make any unauthorised modifications.
• The power supply must be disconnected before proceeding with any
external intervention.
Regulations and Standards
Regulations and Standards
1. The F3S-TGR-SBx-KxC safety light curtains are electro-sensitive
protective equipment (ESPE) in accordance with European Union (EU)
Machinery Directive Annex IV, B, Safety Components and Item 1.
2. The F3S-TGR-SBx-KxC complies with the following regulations and
standards:
(1) EU regulations
Machinery Directive: Directive 98/37/EC
EMC Directive: Directive 89/336/EEC
(2) European standards: EN61496-1, prEN61496-2
3. The F3S-TGR-SBx-KxC received the following approvals from notified
body TÜV Product Service:
EC Type-Examination in accordance with the EU Machinery Directive
TYPE 2 and 4 ESPE (EN61496-1),
TYPE 2 and 4 AOPD (prEN61496-2)
Certificate of a Notified Body for EMC
To Next Page
Need help?
General
