EN 2
Part A-Positive LCD
A1: Time
A2: Low battery indicate
A3: Indoor temperature and humidity
A4: Outdoor temperature
A5: Outdoor temperature sensor
Part B – Back button
B1: “MODE/SET” button
B2: “MEM” button
B3: “+ / ” button
B4: “- /°C/°F” button
B5: battery door
B6: Stand cover
Initial operation:
Open the battery compartment cover
Insert 2 x AAA batteries observing polarity [ “+” and
“ –“ marks]
When you insert the batteries, all icons on the LCD display
will light up for 3 seconds, you will hear a beep tone and
the station detects indoor temperature & humidity.
To Next Page
Loading...
