Techno Line WS7039

EN 4
Manual Date setting
 While date is displayed, press and hold “MODE” button for
2 seconds. The year (2015) starts to flash. Use the “+” and
“-” buttons to set the year.
 Press “MODE” button to confirm your setting, the month
and date icons start to flash. Use “+” and “-” buttons to set
the date on month/date or date/month.
 Press “MODE” button to confirm your setting, the month
display starts to flash. Use “+” and “-” buttons to set the
correct month.
 Press “MODE” button to confirm your setting, the date
display starts to flash. Use “+” and “-” buttons to set the
correct date.
 Press “MODE” button to confirm your setting and to end
the setting procedure.
Setting the daily alarm
 Press “+” button once, LCD will display the “ ” icon, the
alarm function is ON. Press the “+” button once again, the
“ ” icon will disappear, the alarm function is OFF.
 While alarm time is displayed, press and hold “MODE”
button for 2 seconds, The hours of alarm time starts to
flash. Use the “+” and “-” buttons to set the hours.