Techno Line WS7039

EN 6
value of temperature/ humidity. The LCD will display the
minimum value of temperature/humidity. If the “MEM”
button is pressed again the maximum value is displayed.
 While displaying MAX or MIN values, there is “MAX” or
“MIN” on the LCD.
 Press and hold “MEM” button for 3 seconds. The
temperature/humidity maximum/minimum value will reset to
the current values
Please note:
 If the temperature reading is below ranges, the LL.L will be
displayed. If the temperature reading is above ranges, the
HH.H will be displayed.
Switching °C or °F
 Press once “-/°C/°F” button to switching the temperature
unit in °C or °F.