Need help?Do you have a question about the TECHNO-MEDIA SAT-TV 40 and is the answer not in the manual?
General| Brand | TECHNO-MEDIA |
|---|---|
| Model | SAT-TV 40 |
| Category | Antenna |
| Language | English |
Explains the meaning of symbols used in the manual.
Lists conditions that void the product warranty.
Provides essential safety precautions for the installation process.
Step-by-step guide for assembling the satellite dish.
Adjusting the arm/dish angle for satellite pointing.
Instructions for physically mounting the antenna on a vehicle.
Guidance on routing cables through the vehicle.
Describes the connection of the coaxial cable.
Details the installation of the BeepBox Version 1 unit.
Details the installation of BeepBox Version 2, including electrical connections.
Explains wiring connections using preassembled wires.
Explains wiring connections using FastOn connectors.
Instructions for connecting the Set Top Box to the system.
Provides an overview of how the SAT-TV system operates.
Instructions for powering on the antenna system.
Instructions for powering off the antenna system.
Details methods for closing the satellite antenna.
Explains how vehicle power affects antenna operation.
Describes the process of searching for a satellite.
Outlines the sequential steps involved in scanning for satellites.
Guide on setting the correct Set Top Box type for the system.
Explains the motor protection mechanism and how to reset it.
Explains beep codes during system power-on.
Explains beep codes during the satellite scan process.
Details alarm conditions and reset procedures.
To Next Page