Techno HDS Series - Page 42

42
For Support Visit· support.technocnc.com or Call: (631) 648-7481
HDS User Manual
(HTT06291133)
Program Setup will allow
adjustmentstotheG-codele.
- Block delete will delete a
highlightedpartofaG-codele.
- Feedrate bypass will override the
programmed feedrates and use the
percentage feed on the main screen.
- Disable program scroll will stop
every line of G-code appearing on
the screen.
- Optional stop will disable any M01
commandsintheG-codele.
- Rapid override control will allow
speedtobeoverriddenwhenthele
is running.