Need help?Do you have a question about the Technogym RECLINE EXCITE and is the answer not in the manual?
General| Brand | Technogym |
|---|---|
| Model | RECLINE EXCITE |
| Category | Exercise Bike |
| Language | English |
Explains the manual's purpose for qualified technicians and the importance of technical info.
Provides steps for planning repair procedures, emphasizing evaluation, diagnosis, and planning.
Outlines rules for repair, including using original parts, special tools, and consulting technical newsletters.
Lists the 5 available versions of the Recline Excite machine.
Details the width, length, and height specifications of the machine.
Provides mains voltage, frequency, consumption, and fuse rating for different versions.
Explains the 16-character alphanumeric product code structure and key to values.
Illustrates wiring diagrams for the 500, 700, and Wellness TV models.
Details cable connections, including high voltage and serial communication cables.
Illustrates the machine's block diagram for powered and cordless versions.
Explains the function of the 386 Board and Display Board in 500/500SP models.
Explains the CSafe board's communication port for connecting devices and PC interface.
Describes the board that enables reading TGS keys or Smart Cards for programmed workouts.
Explains the receiver that manages telemetric transmitter signals for heart rate monitoring.
Details the brake board's power supply, communication, and winding current generation sections.
Shows the control block diagram for brake operation, involving the digital plan board and brake board.
Explains connecting the machine to CardioTheater via the CSafe board's RJ45 connector.
Describes connecting the machine to a PC for programming using the CSafe board's RJ45 connector.
Lists upgrade kit codes for converting machines to Wellness TV display, including multistandard codes.
Provides step-by-step instructions for installing the Wellness TV upgrade kit.
Lists requirements for correct machine installation, including surface, environment, and placement.
Provides step-by-step instructions for the physical installation of the machine.
Guides the user through the initial power-on and self-test procedure.
Explains how to access the troubleshooting menu for 700 models via password entry.
Details accessing the troubleshooting menu for 500 models via key combinations and password.
Addresses issues where the display does not illuminate due to power supply problems.
Covers errors detected by the brake board, including codes and their meanings.
Addresses the issue of the machine not producing resistance, listing potential causes like signal or brake issues.
Details troubleshooting for incorrect speed signals, possibly due to disk fixing, sensor, or brake board issues.
Covers issues with no heart rate signal, including receiver problems.
Provides instructions for disassembling the display unit.
Explains how to disassemble circuit boards from the display unit.
Provides instructions for removing pedals and pedal cranks, including torque specifications.
Details the procedure for removing and disassembling the electrical box.
Explains how to remove the brake assembly and copper disk, emphasizing care.
Explains how to adjust belt tension by selecting spring positions, with frequency specifications.
Details adjusting the speed sensor position to 0.7 mm from copper disk screws.
Describes adjusting the brake winding support and checking copper disk flatness.
Guides through user menu configuration for 700 models, requiring a password.
Details user menu configuration for 500 models, requiring a password and key combinations.
Explains accessing service menu configuration for 500 and 700 models.
Provides instructions for TV channel tuning and adjustments on the 700E model.
Details radio channel tuning procedures for the 700E model.
Describes simple external cleaning operations for general hygiene.
Covers simple checks on machine operation and state of wear for safe functioning.
Involves checking mechanical components' function, wear, and tension for safe operation.
Explains how to update the machine's software via an external PC connected to the CSAFE port.
Lists the necessary tools for disassembly, adjustment, and maintenance actions on the machine.
To Next Page
