EN18
The snooze time setting range is 5 ~ 60 MIN or OFF, when set to OFF, means no
snooze function. Snooze time unit is in minutes.
Activating and deactivating the alarm
Press the “ALARM” button and the alarm time is displayed. In the alarm time
display mode, press the “ALARM” button again to activate the alarm function. A
signal tone can be heard and the alarm icon " " is displayed. The alarm is acti-
vated.
Press the “ALARM” button again and the alarm icon " " is no longer displayed.
The alarm is deactivated.
Notes:
The alarm will sound for 2 minutes if you do not deactivate it by pressing any
button. In this case the alarm will be repeated automatically after 24 hours.
Rising alarm sound (crescendo, duration: 2 minutes) changes the volume 4 times
whilst the alarm signal is heard.
Switching off the alarm signal
While the alarm is sounding, press any button except the “ ” touch field or press
hold the “ ” touch field for 3 seconds to stop the alarm signal.
Snooze function:
While the alarm is sounding, press the “ ” touch field once to activate the
snooze function. The alarm signal sounds again after the set snooze duration.
In snooze mode, press any button except the “ ” touch field or press and
hold the “ ” touch field for 3 seconds to exit the snooze mode.
Note:
When the snooze function is set to OFF, while the alarm is sounding, pressing the
“ ” touch field does not have this snooze function.
Maximum / minimum temperature / relative humidity
To toggle indoor/outdoor maximum, minimum temperature and humidity data, press the
“MEM” button:
To Next Page
Loading...
