EN31
E1: Device management menu
E2: Account password changing menu
E3: Settings menu
E4: Re-bonding base station
E5: Re-positioning base station
E6: Change device name of station/sensor
E7: Open the temperature and humidity alert function of the station/sensor
E8: Setting the temperature display of the unit
E9: Setting the air pressure display of the unit
E10: Logging off from account
E11: Setting the wind speed display of the unit
E12: Data download menu
E13: Video link for help
E14: Problem form menu for cases of error
Low battery display
WARNING Health hazard!
Batteries contain acids that are harmful to health.
Replace weak batteries as soon as possible to avoid leakage.
Wear coated gloves and protective goggles when handling leaking batteries!
When the battery symbol
“ ” appears in the "IN" column, please change the battery of the base station in
time.
“ “appears in the "OUT" column (Channel 1,2 or 3), please confirm the chan-
nel of the battery promptly and change the battery of the channel's outdoor sensor
in time.
1. Change the corresponding batteries as soon as possible.
2. Use only alkaline batteries.
3. Rechargeable batteries are not suitable because their voltage is too low.
4. Proceed as described in the chapter 'Commissioning' on page EN9.
To Next Page
Loading...
