EN32
5. Dispose of empty batteries in an environmentally friendly way as described in the
chapter 'Disposal' on page EN33.
Please note: After changing the batteries in the transmitter or receiver, your device must
always "re-learn" the transmitter.
Cleaning
Penetration of water into the housing and the use of corrosive and sharp cleaning
agents can damage or destroy the unit.
Clean the base station and the outdoor sensor with a dry, lint-free cloth.
Troubleshooting
- Incorrect values from the transmitter or no signal.
- Batteries of the transmitter are empty.
Please replace them.
- There are sources of interference or obstacles nearby or the distance to the base
station is too great.
Change the position of the transmitter and/or the base station. "Visual contact"
between transmitter and receiver often improves transmission.
- Internal connection problem.
Restart the base station and transmitter by removing and reinserting the batter-
ies.
- No reception of the time signal and weather forecast.
- Data reception may be affected by nearby mountains and valleys, by nearby mo-
torways, railways, airports, power lines, etc., by nearby construction sites, by
nearby electrical equipment (computers, televisions, etc.) and metallic objects, by
location in the middle of tall buildings or in moving vehicles, by concrete buildings.
Place the base station in a location with optimal reception, e.g. near windows and
away from metallic or electrical objects.
It is recommended to keep a distance of at least 1.5 - 2 meters from possibly in-
terfering devices such as computer screens and TV sets.
The station should display the weather correctly overnight at the latest. At night,
atmospheric interference is usually less and reception is possible in most cases.
- WiFi icon is blinking on the station display, which means the base station has no
connection to the App-Server.
- Please check if your WiFi connection is online and working.
To Next Page
Loading...
