TIME RECEPTION ON/OFF SETTING
Digit flashing
Flashing (time
reception icon)
In area where reception of the DCF-77 time is not possible, the DCF-77 time reception
function can be turned OFF. The clock will then work as a normal Quartz clock (Default
setting is ON).
1. The digit “ON” and the time reception icon will start flashing on the LCD.
2. Use the CH/ + key to turn OFF the time reception function.
3. Confirm with the SET key and enter the “12/24-Hour Display setting” or exit the
setting mode by pressing the SNOOZE/ SUN key.
Note:
If the Time Reception function is turned OFF manually, the clock will not attempt
any reception of the DCF time as long as the Time Reception OFF function is
activated. The Time Reception icon will not be displayed on the LCD.
57
To Next Page
Loading...
