71
RESETTING THE INDOOR MAXIMUM/ MINIMUM RECORDS
1. In normal display mode, press the MIN/ MAX button to advance to the MIN/ MAX
display.
2. Press and hold the SET key for about 3 seconds, this will reset all indoor
minimum and maximum data recorded to the current time, date, temperature and
humidity. The max/ min temperature of the currently selected outdoor channel will
also be rest at the same time
DISPLAY OF OUTDOOR MAXIMUM AND MINIMUM RECORDS:
1. In normal display mode, press the CH/ + button to select the desired channel.
The channel ID will be displayed above the outdoor temperature reading.
2. Press the MIN/MAX button, the max temperature of the selected channel will be
displayed. Also the date and time of recording this temperature will be displayed.
3. Press the MIN/MAX button once more, the min temperature of the selected
channel will be shown. Press the ALM button to go back to the normal display
mode.
RESETTING THE OUTDOOR MAXIMUM/ MINIMUM RECORDS
Note: It is required to reset The outdoor max min temperature records of different
channels separately.
1. In normal display mode, press the CH/ + button to select a channel. The channel
ID will be displayed above the outdoor temperature reading.
Note: The transmitter number will only be displayed if more than one transmitter is
applied.
2. Press the MIN/ MAX button once. The max icon will be displayed.
To Next Page
Loading...
