Technoline WQ 145 - LCD Backlight; AM;PM and 24-Hour Clock Format; Alarm Time Configuration; Alarm Activation and Snooze

digits are flashing.
2.
Press "+/12/24" button (4) or “-/C/F” button (5) to change the hour setting. Press
“MODE” button (3) to confirm.
3.
Press "+/12/24" button (4) or “-/C/F” button (5) to change the minute setting.
Press “MODE” button (3) to confirm.
4.
Press "+/12/24" button (4) or “-/C/F” button (5) to change the second setting.
Press “MODE” button (3) to confirm.
5.
Press "+/12/24" button (4) or “-/C/F” button (5) to change the year setting. Press
“MODE” button (3) to confirm.
6.
Press "+/12/24" button (4) or “-/C/F” button (5) to change the date/month and
month/date setting. Press “MODE” button (3) to confirm.
7.
Press "+/12/24" button (4) or “-/C/F” button (5) to change the month setting.
Press “MODE” button (3) to confirm.
8.
Press "+/12/24" button (4) or “-/C/F” button (5) to change the date setting. Press
“MODE” button (3) to confirm.
9.
Press "+/12/24" button (4) or “-/C/F” button (5) to change the calendar language
setting. EN for English; GE for German; SP for Spanish; IT for Italian;. FR for
French. Press “MODE” button (3) to confirm.
10. The digits will stop flashing.
To activate LCD backlight
1.
Press “SNOOZE / LIGHT” button (1) to turn on LCD backlight for approximately
3 seconds.
AM / PM and 24-hour clock setting
2.
Press "+/12/24" button (4) to toggle between AM / PM and 24-hour clock setting
when the time is shown.
To set alarm time:
1. Press “ALARM SET” button (2) to display alarm time.
2. Press and hold “ALARM SET” button (2) until the alarm time digits are
flashing.
3.
Press "+/12/24" button (4) or “-/C/F” button (5) to change the minute setting.
Press “ALARM SET” button (2).
4.
Press "+/12/24" button (4) or “-/C/F” button (5) to change the hour setting. Press
“ALARM SET” button (2).
5.
The digits will stop flashing.
6. Press “MODE” button (3) to display the temperature.
Alarm time:
1. Press “ALARM ON / OFF” button (6) once to active the preset alarm. will
be shown when the alarm is on.
2. Press
“ALARM ON / OFF” button (6) once more to active the snooze
function.
will be shown when the alarm is on.
3. Press “ALARM ON / OFF” button (6) again to turn off alarm.
4.
When the alarm goes off, press any button on the back to deactivate the
alarm.