EN17
The outdoor temperature / barometric pressure falls
Outdoor sensor channels:
• The station can receive up to 3 sensors on 3 differently displayed channels and each outdoor sensor can
only transmit measured data to one specific channel.
• Press the CH button on the station to set one of 4 possible channel display options: channel 1, channel 2,
channel 3 or constant rotation of all 3 channels. The icon is displayed when the rotation is selected.
• Select the same channel on the outdoor sensor by using the CH switch.
• Press and hold the CH button for 2 seconds to clear the current channel and re-register a new sensor to this
channel.
To Next Page
Loading...
