EN4
Press “SET/ ” to confirm your setting, the time zone starts to flash. Press the “UP” or
“DOWN” button to set a correct time zone (-2 to +2). For example, select "0" for Germany or "-
1" for the United Kingdom.
Press “SET/ ” to confirm your setting, the hour display starts to flash. Press the “UP” or
“DOWN” button to set the correct hour.
Press “SET/ ” to confirm your setting, the minute displays starts to flash. Press the “UP” or
“DOWN” button to set the correct minute.
Press “SET/ ” to confirm your setting, the year display 2018 starts to flash. Press the “UP”
or “DOWN” button to set the correct year.
Press “SET/ ” button to confirm your setting, the month display starts to flash. Press the
“UP” or “DOWN” button to set the correct month.
Press “SET/ ” button to confirm your setting, the date display starts to flash. Press the “UP”
or “DOWN” button to set the correct date.
Press “SET/ ” button to confirm your setting, the language selection starts to flash. Press
the “UP” or “DOWN” button to select a language.
Press “SET/ ” to confirm your setting and to end the setting procedures, enter the clock
mode.
Notes:
After 20 seconds without pressing any button, the clock switches automatically from set mode
to normal time mode.
The value of seconds is automatically reset to 00 if the value of minutes is changed.
In the set time, you can hold the “UP” and “DOWN” button to quickly change the setting of the
value
Explanation of the Time Zone display: If you are in a country in which the clock still receives
the DCF signal, but in which the actual local time is different, then you can use the time zone
adjustment to adjust your clock to the local time.
If, for example, the local time in the country where you are now is in one hour behind of
German time, then set the Time zone display to -01. This clock is now DCF controlled, but is
showing a time one hour behind.
There are 7 languages: English, German, French, Italian, Spanish, Dutch and Danish
Week language display
To Next Page
Loading...
Need help?
General
