P. 3
Feature Lists:
•
DCF Radio Controlled Clock
•
Gentle Wake-Up-light 15 or 30 minutes before alarm time
•
Power-saving Super Bright white LED Light with 15-level brightness control
•
Color changing LED mood light
•
Dual alarm
•
12 HR / 24 HR time format
•
Indoor Temperature with degree C / F readout
•
Automatic dimmer of LCD backlight by light sensor
•
Programmable snooze duration from 5 – 60 minutes
•
Battery back-up (3 x AAA batteries, not included)
•
External power saving AC/DC adaptor (included)
INSTALLATION
For best reception of radio controlled signal, keep your clock close to a window and away from metal
surfaces, electrical appliances and magnetic fields. Keep your clock at least 3 feet away from the AC
outlet or the AC/DC adaptor. Plug the AC/DC adaptor to an AC household outlet, and then plug the DC
jack to the back of the clock. Your clock is ready to work for you.
BATTERY BACK-UP INSTALLATION
1. Slide opens the battery cover at the bottom of your unit.
2. Insert 3 x AAA batteries into the battery compartment by observing the correct + / - polarity signs.
3. Replace the battery cover.
4. When only batteries are being used, the always-on backlight, wake-up-light and the color
changing light functions are disabled.
ENVIRONMENTAL RECEPTION EFFECTS
Your radio controlled clock obtains the accurate time with wireless technology. Same as
All wireless devices, the receiving ability maybe affected by, but not limited to, the following
circumstances:
Long transmitting distance Inside concrete buildings
Nearby mountains and valleys Near electrical appliances
Among tall buildings Neat computers and TV’s
Near railway, high voltage cable etc. Inside moving vehicles
Near freeway, airport, etc Near metallic structures
Near construction site
To Next Page
Loading...
