4
RAFFINATO
FIRE PIT (KIT)
A
B
A
B
1 1
C
D
G
H
E
B
A
F
±33'' ±9 13/16''
±1'-6 7/8''
(479 mm)
(249 mm)(838 mm)
±52 3/16''
(1326 mm)
±1'-9 1/4''
540 mm
±38 1/16''
(967 mm)
A. STEEL BOX INSERT
B. CLEAN STONE 3/4''
C.
(20 mm), 4" (100 mm) THICK
RAFFINATO CAP 90 mm (PRE-CUT)
D. RAFFINATO 180 mm CORNER BLOCK
E. RAFFINATO 90 mm CORNER BLOCK
F.
TECHO-BLOC PAVERS OR SLABS
G. SETTING BED 1" (25 mm)
H. COMPACTED GRANULAR BASE 0-3/4'' (0-20 mm)
QUANTITY OF MATERIALS REQUIRED
- RAFFINATO CAP 90 mm: 8
- RAFFINATO 90 mm CORNER BLOCK: 10
- RAFFINATO 180 mm CORNER BLOCK: 20
SECTION 1-1
TOP
ELEVATION B
ELEVATION A
Secure the blocks using a heat resistant concrete adhesive.
The installer must ensure that the installation and use of the
firepit comply with local regulations and code requirements.
NOTE:
www.techo-bloc.com
11/2020
TB-TS-DET_FP_RAFFINATO_1_EN
± 57"
(1449 mm)
± 43"
(1092 mm)
± 12"
(305 mm)
± 19"
(483 mm)
±52 3/16''
(1326 mm)
± 38 1/16"
(967 mm)
RECOMMENDED LOCATION FOR
VENT ACCESSORY (GAS KIT);
RECOMMENDED LOCATION FOR
IGNITION CONTROL (GAS KIT);
Overall Dimensions
Unless installed directly on a paver surface or concrete slab, the re pit should
be buried about 2" or 3" below nished grade.
RAFFINATO
FIRE PIT (KIT)
A
B
A
B
1 1
C
D
G
H
E
B
A
F
±33'' ±9 13/16''
±1'-6 7/8''
(479 mm)
(249 mm)(838 mm)
±52 3/16''
(1326 mm)
±1'-9 1/4''
540 mm
±38 1/16''
(967 mm)
A. STEEL BOX INSERT
B. CLEAN STONE 3/4''
C.
(20 mm), 4" (100 mm) THICK
RAFFINATO CAP 90 mm (PRE-CUT)
D. RAFFINATO 180 mm CORNER BLOCK
E. RAFFINATO 90 mm CORNER BLOCK
F.
TECHO-BLOC PAVERS OR SLABS
G. SETTING BED 1" (25 mm)
H. COMPACTED GRANULAR BASE 0-3/4'' (0-20 mm)
QUANTITY OF MATERIALS REQUIRED
- RAFFINATO CAP 90 mm: 8
- RAFFINATO 90 mm CORNER BLOCK: 10
- RAFFINATO 180 mm CORNER BLOCK: 20
SECTION 1-1
TOP
ELEVATION B
ELEVATION A
Secure the blocks using a heat resistant concrete adhesive.
The installer must ensure that the installation and use of the
firepit comply with local regulations and code requirements.
NOTE:
www.techo-bloc.com
11/2020
TB-TS-DET_FP_RAFFINATO_1_EN
± 57"
(1449 mm)
± 43"
(1092 mm)
± 12"
(305 mm)
± 19"
(483 mm)
±52 3/16''
(1326 mm)
± 38 1/16"
(967 mm)
RECOMMENDED LOCATION FOR
VENT ACCESSORY (GAS KIT);
RECOMMENDED LOCATION FOR
IGNITION CONTROL (GAS KIT);
RAFFINATO
FIRE PIT (KIT)
A
B
A
B
1 1
C
D
G
H
E
B
A
F
±33'' ±9 13/16''
±1'-6 7/8''
(479 mm)
(249 mm)(838 mm)
±52 3/16''
(1326 mm)
±1'-9 1/4''
540 mm
±38 1/16''
(967 mm)
A. STEEL BOX INSERT
B. CLEAN STONE 3/4''
C.
(20 mm), 4" (100 mm) THICK
RAFFINATO CAP 90 mm (PRE-CUT)
D. RAFFINATO 180 mm CORNER BLOCK
E. RAFFINATO 90 mm CORNER BLOCK
F.
TECHO-BLOC PAVERS OR SLABS
G. SETTING BED 1" (25 mm)
H. COMPACTED GRANULAR BASE 0-3/4'' (0-20 mm)
QUANTITY OF MATERIALS REQUIRED
- RAFFINATO CAP 90 mm: 8
- RAFFINATO 90 mm CORNER BLOCK: 10
- RAFFINATO 180 mm CORNER BLOCK: 20
SECTION 1-1
TOP
ELEVATION B
ELEVATION A
Secure the blocks using a heat resistant concrete adhesive.
The installer must ensure that the installation and use of the
firepit comply with local regulations and code requirements.
NOTE:
www.techo-bloc.com
11/2020
TB-TS-DET_FP_RAFFINATO_1_EN
± 57"
(1449 mm)
± 43"
(1092 mm)
± 12"
(305 mm)
± 19"
(483 mm)
±52 3/16''
(1326 mm)
± 38 1/16"
(967 mm)
RECOMMENDED LOCATION FOR
VENT ACCESSORY (GAS KIT);
RECOMMENDED LOCATION FOR
IGNITION CONTROL (GAS KIT);
RAFFINATO
FIRE PIT (KIT)
A
B
A
B
1 1
C
D
G
H
E
B
A
F
±33'' ±9 13/16''
±1'-6 7/8''
(479 mm)
(249 mm)(838 mm)
±52 3/16''
(1326 mm)
±1'-9 1/4''
540 mm
±38 1/16''
(967 mm)
A. STEEL BOX INSERT
B. CLEAN STONE 3/4''
C.
(20 mm), 4" (100 mm) THICK
RAFFINATO CAP 90 mm (PRE-CUT)
D. RAFFINATO 180 mm CORNER BLOCK
E. RAFFINATO 90 mm CORNER BLOCK
F.
TECHO-BLOC PAVERS OR SLABS
G. SETTING BED 1" (25 mm)
H. COMPACTED GRANULAR BASE 0-3/4'' (0-20 mm)
QUANTITY OF MATERIALS REQUIRED
- RAFFINATO CAP 90 mm: 8
- RAFFINATO 90 mm CORNER BLOCK: 10
- RAFFINATO 180 mm CORNER BLOCK: 20
SECTION 1-1
TOP
ELEVATION B
ELEVATION A
Secure the blocks using a heat resistant concrete adhesive.
The installer must ensure that the installation and use of the
firepit comply with local regulations and code requirements.
NOTE:
www.techo-bloc.com
11/2020
TB-TS-DET_FP_RAFFINATO_1_EN
± 57"
(1449 mm)
± 43"
(1092 mm)
± 12"
(305 mm)
± 19"
(483 mm)
±52 3/16''
(1326 mm)
± 38 1/16"
(967 mm)
RECOMMENDED LOCATION FOR
VENT ACCESSORY (GAS KIT);
RECOMMENDED LOCATION FOR
IGNITION CONTROL (GAS KIT);
To Next Page
Loading...
