Why does TECHVIEW QV-3032 buzzer keep sounding?
The buzzer might be sounding because motion detection is activated and the system has detected motion. It could also indicate that the HDD is not being detected, or it lacks sufficient available space, or a video signal has been lost. Check these aspects to resolve the issue.
What to do if TECHVIEW IP Camera gets too hot?
To prevent overheating and increase stability, place the TECHVIEW IP Camera in a location with good air circulation, away from any heat sources.
What to do if my TECHVIEW IP Camera remote controller can’t work normally?
Check if the remote controller's battery is dead or if the remote controller is broken.
General| Night Vision | Yes |
|---|---|
| Power Supply | DC 12V |
| Weather Resistance | IP66 |
| Motion Detection | Yes |
| Supported Protocols | ONVIF, RTSP |
| IR Distance | 20 meters |
| Lens | 4mm |
| Viewing Angle | 90 degrees |
| Night Vision Range | 20 meters |
| Storage | MicroSD up to 128GB |
| Connectivity | Wi-Fi |
To Next Page
