To Next PageTo Next Page
Need help?Do you have a question about the TECHWOOD TBLI-360 and is the answer not in the manual?
Check voltage and avoid water proximity for safe operation.
Use as intended, supervise operation, and consider user capabilities.
Carefully handle sharp blades and hot liquids, avoid overflowing.
Follow operation times, cool down after use, and ensure proper repairs.
Explanation of symbols like OPEN BOOK, WEEE, CE, ROHS, and DOUBLE SQUARE.
Detailed list and diagram of blender parts like jug, lid, blade, and motor base.
Prepare, connect, and operate the blender for the first time, including speed settings.
Advice for pureeing solid ingredients and achieving best results.
How to clean the blender parts and exterior safely with soap and water.
Proper procedures for storing the blender to prevent damage and ensure safety.
Details on the 24-month warranty, proof of purchase, and covered defects.
Provides power supply, power rating, protection class, and manufacturing origin.
This document serves as an instruction manual for the Techwood Stainless Steel Blender, available in models TBLI-360, TBLI-381, and TBLI-385. It provides essential information for safe operation, maintenance, and optimal use of the appliance.
The Techwood Stainless Steel Blender is designed for domestic use, primarily for mixing and pureeing various food items such as fruits and vegetables. It features a robust motor and sharp cutting blades to efficiently process ingredients. The blender is equipped with a glass jug, a lid with a measuring cup, and a speed selector to control the blending process. A key function is the "ICE CRESHED" (Pulse) setting, which allows for short-time blending to achieve desired consistency and control over the blending duration. This function is particularly useful for processing solid or very thick liquid ingredients to prevent the blades from getting stuck.
Before initial use, it is crucial to carefully remove all packaging and accessories. All parts that come into contact with food, such as the bowls and accessories, should be thoroughly cleaned with soap and water, rinsed, and dried. The exterior of the machine cabinet can be cleaned with a damp cloth.
To operate the blender, first ensure the power cord is fully unrolled and the appliance's voltage matches the mains supply. Connect the appliance to a correct socket-outlet, ensuring it is grounded if it is a Class I unit. For blending, prepare food by peeling skin or removing pits if necessary, then cut ingredients into 20-25mm pieces. Place these small pieces into the blend cup, add an appropriate amount of water, and securely close the lid by turning it clockwise. Position the blend cup correctly on its pedestal, aligning with the mark. Plug the blender into the power source.
The blender offers two main speed settings: speed 1 (low speed) and speed 2 (high speed). Adjust the switch to the desired speed to begin blending. For optimal results, especially with solid ingredients, it is recommended to add small portions one by one rather than a large quantity all at once. When mixing solid ingredients, start with a small amount of liquid and gradually add more through the lid opening. The "ICE CRESHED" (Pulse) setting allows for immediate operation when pushed and automatically returns to the "0" position when released, providing precise control for short blending tasks. Blending typically takes 30 to 50 seconds for most foods. After a maximum of 3 minutes of continuous operation, the blender should be allowed to cool for at least one minute to prevent overheating.
Important safety precautions during use include: never leaving the appliance unattended when connected to the power supply; ensuring the appliance has not been dropped or shows visible signs of damage or leakage; and avoiding the use of products or liquids hotter than 80°C (127°F). When handling hot liquids, it is advisable to blend in small quantities to avoid overflowing, and never fill the bowl above half its capacity. Always keep your hand on top of the blender when operating the device. Do not leave cooking utensils in the container during mixing or when the appliance is not in use. If the machine is idle and the blade fails to touch the food, unplug the unit and relax the food before resuming.
Proper cleaning and maintenance are essential for the longevity and safe operation of the Techwood blender. Always switch off the appliance, disconnect it from the power supply, and allow it to cool before any cleaning or maintenance operation.
The outside of the appliance can be cleaned with a sponge or a slightly wet cloth. Removable parts that come into contact with food, such as the plate, bowl, forks, and spatula, can be washed in hot water with a sponge and soft detergent, or placed in a dishwasher. However, the appliance itself should never be immersed in water or any other liquid. Abrasive cleaners, gritting materials, metal brushes, or sharp cutting objects should not be used for cleaning, as they can damage the appliance.
The cutting unit, which includes the sealing ring, cutting blade, and retaining ring, is not removable from the bowl. Care must be taken when handling the sharp cutting blades during cleaning and when emptying the bowl.
Before assembling, disassembling, or cleaning, always disconnect the appliance from the supply. After cleaning, ensure the unit is completely cool and dry before storage. The power cord should not be wrapped around the appliance, as this can cause damage. Store the appliance in a cool, dry place, out of reach of children.
In case the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons to avoid hazards. Repairs should only be carried out by an authorized repairer. Any foreign intervention will void the guarantee. After the warranty period, repairs can still be carried out by a specialized trade or repair service, against payment.
The appliance is designed for home use and complies with relevant European and Moroccan standards for electromagnetic compatibility (EMC) and low voltage (LVD). It is a double-insulated device, meaning it does not require connection to a protective conductor grounded mass. The materials used are classified as double insulation class II. The product is also ROHS compliant, ensuring restricted use of hazardous substances. The "TRIMAN" symbol indicates that consumers are encouraged to dispose of the product as part of a separate collection for recycling.
Power| power supply voltage | 220-240V |
|---|---|
| frequency | 50/60Hz |
| power | 500W |
