3. It is forbidden to apply other power adapter to this product.
Preparation before operation
Power connection
1. The power jack of the sewing machine locates in the bottom right, show in
Fig. Plug the power adapter (32) into corresponding jack (27.
2. Plug the power plug of the power adapter (32) to AC socket, shown in the
Fig.
Foot switch connection
1.The foot switch jack lies in the bottom
right of the sewing machine, shown in the
Fig. Plug the foot switch (31) into
corresponding jack (26).
2.Foot switch (31) shall put on the ground
for the convenience of stamp and control
Change and installation of sewing needle
8
To Next Page
