Thank you for purchasing thisTeckNet product. To ensure optimum
performance and safety, please read these instructions carefully before
operating the product. It is strongly recommended you keep this manual
for future reference.
The mouse is featured with five buttons and one scroll wheel as shown
in the picture below.
1.Left Click Button
2.Right Click Button
3.Scroll Wheel
4.DPI Switch Button
5.Froward Button
6.Back Button
7.Low Battery Indicator
18-Month Battery Life
The mouse consumes very little power andenables a long battery life of
up to 18 months without changing the battery. However please note that
the actual battery life may vary based on user and computing
conditions.
Start for using
1.Connecting the Receiver
Take out USB Nano receiver and plug it into a free USB port in your
computer. The Plug & Play function automatically.
2. The RF 2.4GHZ optical mouse uses one AA battery (Battery is not
included). Open the battery cover. Insert the batteries into the
compartment, ensuring they correspond with the polarity marking.
3. Replace the battery cover.
4. Switch on the mouse by adjusting the power switch underneath the
mouse. The red LED of the power indicator at the top of the mouse
will flash. (DPI will flash about 5-10 seconds, which is pairing process)
4
3
2
7
1
5
6
To Next Page
Loading...
