EasyManua.ls Logo

Tecknet X300 - Install the Battery; Connecting the Receiver

Tecknet X300
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
18-Month Battery Life
The mouse consumes little power and offers a long battery life up to
18 months without changing battery. However please note that the
actual battery life may vary with using conditions.
Install the Battery
The RF 2.4GHZ optical mouse uses one AA battery (Battery is not
included).
1. Press the button at the bottom of the mouse as shown in the picture
below. The battery compartment cover will open.
2. Take out the battery compartment cover on the bottom of the mouse.
3. Insert the battery into the compartment, ensuring they correspond
with the polarity markings.
4. Replace the battery cover.
5. The red LED of the power indicator at the top of the mouse will flash
for 10 seconds.
Note: Make sure that the polarity of the batteries is correct. The positive (+) and
negative (-) ends of each battery must match the positive (+) and negative (-)
markings in the battery housing.
Connecting the Receiver
Take out USB Nano receiver and plug it into a free USB port in your
computer. The Plug & Play function of your system will detect that a
new device has been connected and install it automatically.
2
1
USB Port Nano receiver
PRESS
EN

Related product manuals