What to do if the TECMASCHIN HU-P1316 Packaging equipment battery is empty?
If the battery of your TECMASCHIN Packaging equipment is empty, replace it with a charged one and charge the dead battery.
What to do if tape is stuck in the TECMASCHIN Packaging equipment?
If the tape is stuck in your TECMASCHIN Packaging equipment, remove the battery, cut the tape. Then, open the device and remove the stuck tape.
Why the blade does not cut the tape completely in TECMASCHIN HU-P1316 Packaging equipment?
If the blade of your TECMASCHIN Packaging equipment does not cut the tape completely, adjust the cutting force.
What to do if welding time is too short on TECMASCHIN HU-P1316?
If the welding time is too short on your TECMASCHIN Packaging equipment, increase the welding time.
What to do if welding time is too high on TECMASCHIN HU-P1316?
If the welding time is too high on your TECMASCHIN Packaging equipment, reduce the welding time.
What to do if welding pressure is too low on TECMASCHIN HU-P1316 Packaging equipment?
If the welding pressure is too low on your TECMASCHIN Packaging equipment, increase the welding pressure.
What to do if welding pressure is too high on TECMASCHIN Packaging equipment?
If the welding pressure is too high on your TECMASCHIN Packaging equipment, reduce the welding pressure.
What to do if the blade moves down too far on TECMASCHIN Packaging equipment?
If the blade moves down too far on your TECMASCHIN Packaging equipment, reduce the cutting force.
Displays the status of the device's operation through colored LED lights for user feedback.
Adjusts the duration of the welding process for optimal strap fusion, preventing melting or poor adhesion.
Modifies the strap tension to prevent loosening or over-tightening, ensuring secure packaging.
Modifies welding pressure to ensure proper strap fusion based on material thickness and type.
Adjusts the cutting mechanism to ensure clean and complete strap separation.
General| Brand | TECMASCHIN |
|---|---|
| Model | HU-P1316 |
| Category | Packaging equipment |
| Language | English |
To Next Page