To Next PageTo Next Page
Need help?Do you have a question about the TECMOR PGT 32/25 three-phase and is the answer not in the manual?
Lists the specific bending and combined machine models offered by the manufacturer.
Details the electrical drive, manual control, and bending/cutting capabilities of the machines.
Presents a table with technical specifications for various machine types including turns, power, weight, and dimensions.
Describes information found on the Certificate of Conformity and machine plate, such as producer details, CE mark, type, and serial number.
Instructions for preparing a horizontal and stable space sufficient for machine weight and operation.
Specifies the need for clear space around the machine for worker movement and maintenance.
Details voltage requirements, cable consistency, and the necessity of a differential switch.
Emphasizes compulsory grounding connection with a resistance value for contact tension safety.
States that normal ambient lighting is required; supplemental lighting may be necessary.
Covers general controls, starting, and bending operations for standard machines.
Explains the use of panel controls for programming sequences and speed adjustments.
Guidance on monthly oil level checks and recommended complete oil substitution.
Instructions for checking belt tension and condition to prevent malfunctions.
Procedure for checking and replacing machine blades based on working hours.
Details the magneto-thermic switch and differential safety feature of the machine.
Highlights the importance and implementation of machine body grounding for safety.
Describes the mushroom-button emergency-stop control for immediate power cutoff.
Explains purpose-built controls with IP 54 protection to prevent accidental starting.
Details the foot-pedal as the machine starting control, requiring continuous pressure.
Describes protected gear parts requiring a wrench for access, ensuring contact impossibility.
Identifies risks of impact in the bending area and shearing in the cutting area.
Notes the electrical residual risk associated with the 400V power supply.
Specifies the sound pressure level is less than 70 dB during operation.
General