Tecnam P2006T - Page 134

Page 4 - 18
Section 4 – Normal procedures
4
th
Edition, Rev. 0
3.5. BEFORE TAXIING
1
Let the engines warm up to a minimum oil temperature of 50°C at 1200 RPM
2
Nav and taxi lights
ON
3
Audio panel
ON
4
COM
ON
5
NAV
ON
6
Transponder
Standby
7
Passengers and crews seat belts
Fastened
8
Passengers and crews headphones
Set as required
3.6. TAXIING
Ensure that the main and passengers’ doors warning lights are turned off.
1
LH/RH Fuel Selector
As required
2
LH and RH fuel pressure
Monitor
3
Parking Brake
RELEASE
4
Flight instruments
CHECK
5
Engine instruments
CHECK
6
Altimeter
SET both and crosscheck
max difference 150 ft
7
Brakes
TEST
NOTE