Tecnam P2008 TC User Manual

P2008 TC
Flight Manual
1
FLIGHT MANUAL
US-LSA
P2008 TC
Manufacturer
COSTRUZIONI AERONAUTICHE TECNAM S.r.l.
Serial number: ________________
Build year: ___________________
Registration: __________________
Introduction
This manual contains information to be furnished to the pilot as required by the FAA in addition to further information
supplied by the manufacturer.
This manual must always be present on board the aircraft.
The aircraft is to be operated in compliance with information and limitations contained herein. All sections follow the
ASTM guidelines as finalized 14 December 2007.
Ed1 rev3- 02/08/2017

Tecnam P2008 TC Specifications

General

Manufacturer	Tecnam
Model	P2008 TC
Horsepower	100 hp
Power	73.5 kW
Seats	2
Cruise Speed	124 knots (143 mph, 230 km/h)
Range	700 nautical miles (805 miles, 1, 296 km)
Stall Speed	39 knots
Rate of Climb	1000 ft/min
Fuel Capacity	100 liters

Summary

SECTION 1 GENERAL

1.3 Descriptive Data

SECTION 2 OPERATING LIMITATIONS

2.1.1 Airspeed Limitations

Lists critical airspeed limits and their operational significance.

2.1.2 Airspeed Indicator Markings

2.1.3 Powerplant Limitations

Lists operating limitations for the aircraft's engine.

SECTION 3 WEIGHT & BALANCE

3.1 Aircraft weighing procedures

3.2 Weighing report

SECTION 4 PERFORMANCE

4.1 Use of Performance Charts

4.4 Stall Speeds

4.6 Takeoff Performance

Provides data for takeoff distance calculations under various conditions.

4.7 Landing Distance

Provides data for landing distance calculations under various conditions.

4.8 Climb Performance

SECTION 5 EMERGENCY PROCEDURES

5.1 Engine Failures

Details procedures for engine failures on the ground and in flight.

5.2 Smoke and Fire

Provides actions for engine and cabin fires.

5.3 Landing Emergency

Covers procedures for forced landings with and without engine power.

SECTION 6 NORMAL PROCEDURES

6.2 Checklist Procedures