Tecnam P2010 Aircraft Flight Manual

AFMS N°D01 FOR GARMIN GFC700 AUTOPILOT INSTALLATION AND
RNAV/RNP NAVIGATION ELIGIBILITY
Page 1A-20
Section 1 – General
AUTOPILOT DESCRIPTION
Ed. 1, Rev. 0
Autopilot control panel
The GDU1044 includes a set of additional softkeys dedicated to the control of
Autopilot system.
The following dedicated AFCS keys are located on the bezel of the MFD (refer
picture below):
1) AP Key: Engages/ disengages the autopilot
2) FD Key: Activates/deactivates the flight director only
3) NAV Key: Selects/deselects Navigation Mode
4) ALT Key: Selects/deselects Altitude Hold Mode
5) VS Key: Selects/deselects Vertical Speed Mode
6) FLC Key: Selects/deselects Flight Level Change Mode
7) HDG Key: Selects/deselects Heading Select Mode
8) APR Key: Selects/deselects Approach Mode
9) VNV Key: Selects/deselects Vertical Path Tracking Mode for Vertical
Navigation flight control
10) NOSE UP/ NOSE DN Keys: Control the mode reference in Pitch Hold,
Vertical Speed and Flight Level Change modes
Autopilot control panel

Tecnam P2010 Specifications

General

Manufacturer	Tecnam
Model	P2010
Engine	Lycoming IO-360-M1A
Seating Capacity	4
Type	Light aircraft
Horsepower	180 hp
Service Ceiling	15, 000 feet
Height	2.60 m (8 ft 6 in)
Maximum Takeoff Weight	1, 160 kg
Propeller	2-blade fixed pitch