1. RECORD OF REVISIONS
Any revision to the present Manual, except actual weighing data, is recorded: a
Record of Revisions is provided at the front of this manual and the operator is ad-
vised to make sure that the record is kept up-to-date.
The Manual issue is identified by Edition and Revision codes reported on each page,
lower right side.
The revision code is numerical and consists of the number "0"; subsequent revisions
are identified by the change of the code from "0" to "1" for the first revision to the
basic publication, "2" for the second one, etc.
Should be necessary to completely reissue a publication for contents and format
changes, the Edition code will change to the next number (“2” for the second edi-
tion, “3” for the third edition etc).
Additions, deletions and revisions to existing text will be identified by a revision
bar (black line) in the left-hand margin of the page, adjacent to the change.
When technical changes cause expansion or deletion of text which results in un-
changed text appearing on a different page, a revision bar will be placed in the right-
hand margin adjacent to the page number of all affected pages providing no other
revision bar appears on the page.
These pages will be updated to the current regular revision date.
In order to be constantly updated on change on this document from TECNAM, It is
the responsibility of the owner to register on TECNAM website at:
www.tecnam.com
NOTE: It is the responsibility of the owner to maintain this handbook in a current
status when it is being used for operational purposes.
To Next Page
Loading...
