Tecno Megabook T1 - Notice of Repair

Copyrightbelongs to Carlcare, cannot leak without permission
Document Number
Document Name
Page
CCTM2022160
TECNO Megabook T1 Service
Manual
16
/
17
Security Classification
Release Time
Version
Internal Use
2022-09-15
V1.0
6 NOTICE OF REPAIR
Serial Number
Detail Description
Picture
1
T1 has 6 different kind of screws,
please notice the position, do not
assemble wrong, the screws
position, please refer to Screws
info.
2
Before disassembling laptop,
please switch off it at first.And
after disassembling D shell,
please open battery connector at
first.
3
When you disassemble screen and
A shell assembly, open the screen
to 90 degrees at first, then
remove the screen and A shell
assembly.
4
When you disassemble B shell,
you can use scraper knife to insert
B shell carefully, let appear a gap,
then use disassemble stick insert
the gap to disassemble B shell,
please notice protecting screen.
5
Before disassembling screen,
please pull the easy-to-pull gel at
first, include left and right easy-
to-pull gel. When you assemble
screen, please replace a new easy-
to-pull gel.