Need help?Do you have a question about the Tecnoalarm Tecnofire TFA1-298 and is the answer not in the manual?
System release, firmware, model, and language information.
Manufacturer's declaration of compliance with EU directives and regulations.
Standards and certification numbers for control panels and power supplies.
Requirements for correct installation, environmental conditions, and component usage.
Info on technical assistance, power supply planning, and preventing induced damage.
Guidelines for system efficiency and essential maintenance controls.
Key system parameters like loops, zones, access levels, and alarm plans.
Information on control panel and power supply compliance with EN 54 standards.
Description of the control panel's display, LEDs, keys, and voice synthesis.
Management of 4 access levels and the monitored system mode.
Details on detection loops, detectors, modules, and communication options.
Information on repeater panels, synoptic repeaters, and auxiliary power supplies.
Instructions for handling, mounting, and securing the control panel casing.
Guidelines for connecting cables, including material specifications and electrical safety.
Requirements for ground connection, circuit breakers, and mains power connection.
Battery information, charging voltage regulation, and automatic disconnection.
Description of the control panel's display, LEDs, keys, and interaction.
Details on the 4 access levels, their functions, and how to enter codes.
Explanation of the control panel's function keys, navigation, and reset procedures.
Functions and procedures for interpreting the LED indicators on the control panel.
How the display shows stand-by, active events, and acknowledged events.
Optical and acoustic notifications for different priority levels and alarm states.
Illustrations and meanings of icons used for system states, alarms, and failures.
Specific failures related to EN 54-2, their descriptions, and acknowledgment.
Other failure types, their causes, and acknowledgment status.
Components, polarity protection, and automatic acknowledgment of the power supply.
Detailed specs for power supply, batteries, and failure notification parameters.
Tables detailing primary, secondary, and charger failure notifications and their handling.
Rules for assigning devices to zones and types of zones (fire, technical).
How single-knock and double-knock fire zones trigger alarms and prealarms.
How technical zones react to prealarms and alarms, and specific settings.
Operation and logic of the monitored system mode, including access and alarm triggering.
Layout and connections of the terminal board, including protection features.
Detailed list of terminals, their functions, outputs, and programmable options.
Description of the CPU board, key jumpers, and special procedures.
Specifications and protection features of the switching power supply unit.
How to connect detectors and modules to the detection loop.
Wiring instructions for connecting sirens and optical-acoustic alarm devices.
Connecting expansion devices via the RS485 bus.
Connecting additional power supplies (TFPS-5) to the system.
Details on connecting and configuring the telephone communicator.
Connecting the external Ethernet interface for network communication.
How to connect and configure repeater panels for system management.
General| Category | Firefighting Equipment |
|---|---|
| Type | Fire Alarm Control Panel |
| Power Supply | 230V AC, 50/60Hz |
| Humidity Range | Up to 95% RH, non-condensing |
| Dimensions | 90 mm |
| Weight | 2.5kg |
| Model | Tecnofire TFA1-298 |
To Next Page