Need help?Do you have a question about the Tecnosicurezza T6530/DL and is the answer not in the manual?
General| Type | Electronic Lock |
|---|---|
| User Capacity | Up to 100 users |
| Material | Zinc alloy |
| Unlock Methods | PIN code, RFID card, Mechanical key |
| Operating Temperature | -20°C to 60°C |
Manager and user roles, code management, and rejection rules for new codes.
Programmable time delay (0-99 min) and open window (1-19 min) with LED/buzzer signals.
Signal indicating low battery (<6V) during motor activation.
5-minute lock blocking after 4 consecutive wrong codes, with visual feedback.
TD override user #9 and basic I/O features like silent alarm.
Advice on changing factory codes, security, testing, and code storage.
Procedure for opening the lock with valid codes, including time delay scenarios.
Lock blocking for 5 minutes after multiple invalid code entries.
Step-by-step guide for changing the existing lock code.
Process for adding a new user code using the main code.
Procedure to delete an existing user from the lock system.
Diagnostic test to verify the functionality of each key on the keypad.
Programming time delay and open window values for lock operation.
Guidance on replacing the lock's batteries and recommended types.
To Next Page
