STEP n.
12
Reconnect all connectors. Then take the fan
support and fix it at the bottom part of chiller.
Attention: the front panel side must be insert in
the aluminum profile!
www.tecoonline.com | www.tecous.com
Rebuild the top part of the chiller following the
indicated sequence:
1. 4 INOX screw (fix the fan support on metal
cover)
2. Fan blade
3. Fan blade screw
4. Red ring (only for TK500 and TK1000)
5. Metal grid
6. Metal grid, 4 black washers and 4 screws
7. Conveyor
8. Air filter
9. Air filter grid
To Previous Page
Loading...
