TECO TWW40HFCG - General Operation Guide; Getting Started with Operation

General Opera on Guide
(Not applicable to TWW16CFCG)
Remote Control
Note:
Ɣ Range of time setting is: 0.5~24h
Ɣ The interval between two motions can't exceed 5s, otherwise the remote controller
w
ill exit setting status.
Combined Bu on Func ons
Child Lock Func on
Press “+” and “-” buttons simultaneously to turn on or turn off child lock function.
When child lock function is active, the LOCK indicator will be displayed on the
r
emote. No signal will be sent from the remote while it is in Child Lock.
Switching between ce rade and
While the air conditioner is off, press both “MODE” and “-” buttons
s
imultaneously to switch between °C and °F.
Ge ng Started
1. Connect the power to the air conditioner. Press the ON/OFF button on the
remote controller to turn on the unit.
2
. Press the MODE button to select between AUTO, COOL, DRY, FAN or
HEAT.
3
. Press + or - buttons to set the required temperature.
The temperature can ot be set under AUTO mode.
4
. Press FAN button to set from the following fan speeds
Auto, Low, Medium and High.
15
n