Need help?Do you have a question about the TeeJet Technologies Centerline 230BP and is the answer not in the manual?
General| Display Size | 4.3 in (109 mm) |
|---|---|
| Display Type | Color LCD |
| GPS Accuracy | 1 - 3 m (3 - 10 ft) with WAAS/EGNOS |
| GPS | Yes |
| Connectivity | NMEA 0183 |
| Power Supply | 12 VDC |
| Input Voltage | 10-16 VDC |
| Guidance Modes | Straight AB, Curved AB, Circle Pivot |
| Return to Point | Yes |
| Area Measurement | Yes |
| Data Logging | Yes |
Highlights new features and improvements in software version 1.07.
Details the availability and benefits of Tilt Gyro compensation as an upgrade.
Explains the role of the Smart Cable in connecting the CL230BP to rate controllers.
Details the hardware and software connections for the guidance system.
Provides instructions for positioning the GPS antenna and routing the cable.
Describes the steps performed by the CL230BP upon system power up.
Explains how to reset bounded/applied areas and A-B guidelines.
Covers entering Setup Mode, initial screens, and general screen timeouts.
Details setting boom width, offset direction, and offset distance.
Covers display setup mode, screen, brightness, contrast, and background.
Details customizing LED spacing and selecting GPS source.
Explains configuration of the COM port for DGPS data transmission.
Covers system power up and the various operation reference screens.
Details the Mark A-B screen and its guidance mode indicators.
Explains the operational navigation screen with swath number and vehicle speed.
Describes the map page showing center and next guidelines with distance.
Details the screen for completed bounded areas and calculated acreage.
Explains the function keys used for operation, including Setup and Guidance modes.
Outlines the available guidance modes: Straight A-B, Curved A-B, Circle Pivot, Headland Circuit.
Details how to establish a perimeter and bounded area for headland circuit guidance.
Explains how to set up and use straight line guidance based on an A-B line.
Describes setting up curved line guidance, noting recommendations for curve angle.
Details how to establish a circle pivot A-B line for radial guidance.
Explains how to set and navigate back to a stored point using the compass view.
Describes the A+ Nudge feature to shift the A-B guideline to the vehicle's current location.
To Next Page
