Safety Warning Labels & Product Specifications
Important: Please review all labels and supporting materials before using your vibration cushion.
This drawing indicates the locations of the warning labels found on your product. If a label is missing, illegible or is removed,
contact Teeter Customer Service to request a complimentary replacement label.
Note: Image and labels below not shown at actual size.
Vibration Cushion Assembled Dimensions: 44.5 (L) x 17.0 in (W) (113.0 x 43.2 cm)
Neck Arch Support Dimensions: 10.0 (L) x 11.5 in (W) (25.4 x 29.2 cm)
Weight
(approx.): 5.5 lbs (2.5 kg)
17.0 in (43.2 cm)
44.5 in (113.0 cm)
10.0 in (25.4 cm)
11.5 in (29.2 cm)
3
Serious injury or death may occur
To REDUCE THIS RISK:
Read and follow all instructions.
BE CERTAIN power cord is routed away from the
inversion table pivot points. DO NOT use if cord or
plug are damaged .
DO NOT use wet or place damp towels on the pad.
DO NOT use pins or metallic fasteners .
DO NOT remove cover.
DO NOT use for over 15 continuou s minutes.
DO NOT operate under a blanket a pillow -
excessive heating can occu r possibly leading to
fire, electr ic shock or personal injury.
Individuals with pacemakers or circulator y
conditions should consult a physician before use.
Use on inversion table will affect the balance
causing the table to rotate faster. Adjust table
pivot settings accor ding to the Owner’s Manual.
!
WARNING
To Next Page
Loading...
