Before reinstalling the ball, check that
the pipe is not blocked by blowing into
it.
Press on the internal part of the safety
valve spring to check that it is not
clogged.
Before removing the internal lid, clean
the upper part of the cooking bowl.
Clean the inside of the appliance’s
metal lid using a damp sponge and
check that the manometric rod
(above) is properly positioned to
ensure that it is not blocked.
Clean the upper part of the cooking
bowl using a damp cloth. Clean the
condensation trap using a damp cloth.
Rinse under water and check that the
manometric rod can move around.
Clean the outside of the appliance’s
lid using a damp sponge. Clean the
silencing valve at the back of the lid.
Clean the seal on the metal lid using a
damp cloth then rinse thoroughly. Do
not use sharp objects.
29
CLEANING MAINTENANCECLEANING MAINTENANCE
To Next Page
Loading...
