15
EN
CAUTION: Do not add ingredients or use the pusher while blending
hot preparations due to risk of splashing. Opening the lid cap from the
lid during hot preparations may cause burns.
7. Stop a program automatically or manually:
At the end of the program, the appliance stops automatically and plays a
notification tone (Fig. 7). You can also stop the blending during the cycle
by pressing <Start/Stop> button.
If the appliance is left unused for 30 seconds, it will go into sleep mode
displaying 2 dashes.
8. Remove the jar:
Once the appliance has stopped, unplug it and remove the jar from the
motor unit (Fig. 8).
9. Remove the lid:
Turn the lid anticlockwise and lift it off the jar (Fig. 9).
CAUTION: For hot preparations, beware of escaping steam and take
care not to burn yourself (Fig. 11).
CAUTION:
• If the ingredients contain bones (e.g. fish bones), pass the preparation
through a sieve before consumption to remove any small fragment.
• Let the blender rest at least 5 minutes between two auto-programs
(especially long recipe).
• Do not shake the motor unit or the jar when the blender is in use.
To Next Page
Loading...
