16
CLEANING YOUR APPLIANCE
1. Cleaning the jar:
1a. using cleaning auto-program:
• Clean the jar immediately after use.
• Empty the jar and add 1000ml clear water.
• Press <Menu> button several times to reach Quick clean or Deep clean
auto-program.
• To start the chosen program, press <Start/Stop> button.
• After the cleaning program has stopped, empty the jar, rinse it and
carefully wipe it dry.
• Quick clean and Deep clean auto-programs are not designed to replace
manual cleaning and may not remove all residues.
1b. cleaning manually:
• Clean the jar immediately after use.
• Rinse the jar with warm soapy water and clean the inside and outside
with a damp cloth.
• In the event of the bottom part of the jar getting dirty, fill in the jar
with a mix of water and washing up liquid (or alimentary baking soda)
and let it soaked for a few hours, then use the brush to clean the inside
of the jar.
• Carefully wipe the jar dry after cleaning.
CAUTION:
Refer to figures page 4.
• The blades in the jar are very sharp. Take care not to cut yourself
when cleaning the inside of the jar (Fig. 12).
• If you use washing up liquid with the auto-programs. Take care to put
only 1 drop. An excess of washing up liquid creates more foam and
consequently can lead to overflowing.
• Do not immerse the jar base in water (Fig. 13). Do not allow water to
To Next Page
Loading...
