17
EN
come into contact with the coupler on the jar base. If the coupler gets
wet, allow it to dry out before using the appliance.
2. Cleaning the motor unit:
Use a soft, damp cloth to clean the surface of the motor unit. Do not
use a wire sponge or abrasive cloth, as these may scratch or damage the
surface.
CAUTION: Do not immerse or rinse the motor unit under water (Fig. 14).
3. Cleaning the lid:
• Rinse the lid with warm soapy water and clean the inside and outside
with a damp cloth.
• Carefully wipe the lid and sealing ring dry before returning them to their
original position.
CAUTION:
• Do not immerse or soak the lid in water. Prefer to rinse it under running
water (Fig. 15).
• Do not pull on the sealing ring, as it may cause it to change shape and
impair its function.
To Next Page
Loading...
