TEFAL HOME CHEF - Page 21

21
EN
Problem Possible reasons Solutions
Intense release of
pressure from pressure
limit valve
Faulty pressure control
resulted in release of pressure.
Send to repair and
maintenance department.
Pressure limit valve did not
fall into place.
Carefully rotate/press the
pressure limit valve to make
itfall into place.
Continuous pressure
release from float valve
Residue in the float valve.
Clean and remove the
residue.
Float valve is stuck.
Stop the appliance and
wait for the appliance to
cool down. Then clean and
wipe the float valve, before
restarting the cooking.
“E0” , “E1” displayed on
digital screen
Send to repair and
maintenance department.
“E2” displayed on digital
screen.
The lid is not in the position
defined for the selected
cooking mode.
Please refer to the cooking
table to check the right
position of the lid for the
program you have selected.
Lid switch sensor does not
function.
Send to repair and
maintenance department.