EasyManua.ls Logo

TEFAL Speedy Cook - Reheat Program; Delayed Start Function; Advanced Operation; Open the Lid

TEFAL Speedy Cook
39 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6362
EN
Reheat program
Place the ingredients in the cooking pot and close but don’t
lock the lid.
Press Reheat program button
. The screen displays the de-
fault cooking time.
Optional: Set the desired time by pressing
(to decrease time)
or (to increase time).
Press
to start the cooking program.
The appliance starts the pre-heating phase. The screen
displays alternatively
& and the pre-heating
light indicator turns on.
When the pre-heating phase is completed, the appliance switches
automatically to cooking phase. The screen displays the count
down and the cooking in progress light indicator turns on.
At the end of the count down, the appliance beeps and the
screen displays .
After a few seconds, the appliance will automatically switch to
keep warm phase. The screen displays
and the keeping
warm light indicator turns on.
Press
for 3 seconds to stop the program at any time.
7. Use the delayed start function
Delayed start can be useful to preset the appliance to start
cooking later.
First select a program following the steps described above in
part 6.
Before starting the selected program, press
. The set delayed
start time light indicator turns on and the screen displays the
default time for delayed start.
Optional: Set the desired time by pressing (to decrease time)
or (to increase time)
Press
. The screen displays the delayed start count down.
When preset time is elapsed, the appliance will start cooking
automatically
8. Open the lid
Do not attempt to open the lid if the float valve is up and if the
under pressure light indicator
is turned on.
The pressure can be release in 2 different ways at the end of
the cooking:
Natural release: At the end of the cooking or after stopping the
program, the appliance will cool down by itself, and the pressure
will release naturally. During natural release, food might over-
cook due to the remaining pressure in the pot. Use manual re-
lease to stop cooking process immediately.
Manual release: Press continuously the pressure release button,
on top of the lid. It will take a few seconds to a few minutes
depending on the amount of food inside of the cooking pot (Fig.31).
WARNING: Be careful of the hot steam coming out from the
appliance. Keep your face and hands away from the steam
output (Fig.45).
To open the lid, position your arm parallel to the side handles,
take hold of the lid knob, turn anti-clockwise and lift the lid up
(Fig.32 & 33).
WARNING: Be careful of the hot steam coming out from the
cooking pot.
9. Unplug the appliance
After usage, unplug the appliance and let it cool down for at
least 2 hours before cleaning.

Related product manuals