4. D Pushbutton -- The push-to-read D (dissipation factor) pushbutton displays the D of a capacitor or
inductor when the C or L function is selected.
5. Range Switch -- Selects the decimal multiplier and units of measurement for the meter circuit being
used. The basic multipliers and units are: H (henrys), mH (millihenrys), µH
(microhenrys), pF (microfarads), nF (nanofarads), pF (picofarads), k Ω (kilohms),
Ω (ohms), mS (millisiemens), and µS (microsiemens).
6. Display — A 3-1/2-digit readout for all functions.
7. Tiltstand Handle -- Aids portability; tilts instrument for easier viewing of the LED display.
2-2
To Next Page
Loading...
